In the actual welding production process, but also because of various reasons and produce a variety of problems.
如何辨别问题出现的原因，如何解决质量问题的出现，这是生产工艺管理过程中非常重要的一环。
How to identify the causes of the problem and how to solve the quality problems, which is a very important part of the production process management.
首先，要对焊接品质进行检查焊接品质的检查。一般有目视检验和破坏性检验两种方法。目视检验顾名思义，是工作人员根据自己丰富的工作经验来判定焊接产品是否合格，但若凭此检验就下结论，还不充分，这就需要进行破坏性检验，即撕开焊接母材进行确认。另外，也可利用拉伸仪进行拉伸强度的检验。

First of all, to check the quality of welding welding quality inspection. There are two methods: visual inspection and destructive test. Visual inspection as the name suggests, is the staff according to their rich experience in welding to determine whether the product is qualified, but if by this test and as a result, is not sufficient, which requires destructive testing, which ripped the weldments for confirmation. In addition, the tensile strength of the tensile test can also be used.

其次，根据现象进行原因分析。一般来说，若出现焊接加工不良，可能材料有问题，激光焊接机需要在检查材料质量后更换材料或改变激光焊接机波形设定工艺条件进行解决。

Secondly, according to the phenomenon analysis. In general, if the welding process is poor, the material may be a problem, the laser welding machine needs to change the quality of the material after the inspection of the material or change the laser welding machine set the process conditions to solve.
若所焊接产品的同一部位连续出现焊接不良，很可能是工作台和夹具有问题；若偶尔有焊穿和虚焊现象，可以检查焊接机的能量稳定性或工作台及夹具是否存在问题。
If the same welding parts of a product for poor welding, is likely to be the work table and the fixture problems; if the occasional welding and weld, welding machine can check the energy stability of the worktable and jig or if there is a problem.
再次，加强焊接品质保证管理。在焊接过程中，一要经常用压力测试仪对焊接压力进行测试，以使压力保持不变，同时，要经常对焊接机头的动作状况进行检查。
Third, strengthen the management of welding quality assurance. In the welding process, we should often use pressure tester to test the welding pressure, so that the pressure remains unchanged, at the same time, we should always check the welding head movement.
二要加强对电流的监测，避免出现电源电压的波动、焊接机超载运作而引起的过热使电流输出减少、工件接触不良导致电流减少、激光焊接机性能不良等问题；三要考虑工件厚度、镀层厚度、金属成分等的变化，避免焊接不良品的出现。
Two to strengthen the monitoring of the current, avoid the fluctuations of the supply voltage, overload operation of welding machine caused by overheating causes the current output, reduce adverse current, reduce the workpiece caused problems in laser welding machine of bad performance; three to consider the change of workpiece thickness, coating thickness, metal components, avoid bad welding the.
本文由山东自动焊接设备友情奉献.更多有关的知识请点击:http://www.tayfsk.com.cn/我们将用最先进的技术.最真诚的态度.为您提供最为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
In this paper, by the Shandong automatic welding equipment friendship dedication. More related knowledge: Please click http://www.tayfsk.com.cn/ we will use the most advanced technology. The most sincere attitude, to provide you with the most comprehensive service. More related knowledge and we will continue to offer. Please look forward to.